| Tube Settler Media |
BK-60-T Tube Settler Media utilize individual, isolated tubular channels; each sloped at 60° or 55° to expand thee settling capacity of water and wastewater clarifiers. Engineered with the individual tubes rising in the same direction to eliminate mixing currents and unstable flow pattern. Constructed of flame-resistant, self extinguishing PVC that is also inert to naturally occurring constituent in water and wastewater. |
|
|
| Improved Efficiency |
| The chevron shape and configuration of BK-60-T series module is engineered to create laminar flow for rapid settling of solids. This enhanced settling reduces chemical coagulant use and downstream filter backwash requirements. For plant design and upgrading less settling area is needed. |
 |
|
| Bio Growth Media |
BK-27B is specially designed for biological fixed film systems. Cross Flow media provides a cost effective method for reducing of organics (Roughing and polishing), nitrification, de-nitrification and anaerobic treatment of municipal and industrial waste water. The modules are fabricated and rigid, non-flammable PVC sheets are UV-protected and resistant to rot, fungi/ bacteria, acids and alkalis commonly present in municipal wastewater. |
|
|
The Cross Flow Advantage
Each sheet in a module is completely corrugated at a 60° angle from the horizontal and assembled in cross-corrugated pattern with adjacent sheets, creating a minimum 95% void-to-volume ratio. This configuration provides continuous and uniform horizontal distribution of both air and water throughout the full media depth, enhancing contact between the wastewater and the media bio film.
Varied Applications
- Tricking filters, bio-towers, nitrification towers; for new installation or replacement of existing media.
- Ideal replacement for rock, wood, or random media, increases retention time and wastewater biomass contact; improves wastewater distribution and ventilation.
- Excellent for submerged fixed-film systems in either aerobic or anaerobic modes, high mixing/redistribution and open void area promotes air and liquid mixing without impeding flow.
|
|
|
| Diffuser |
| Diffused Aeration |
Diffused Aeration is a process of Oxygen Transfer by Molecular Diffusion through the interface film between the air and liquid which increases in proportion to the interfaced area.
Membrane Diffused Air System is the revolution in the Modern World for the ETP & STP plants. People are fast switching over to this technology due to various advantages of this technology over other methods
|
|
|
|
| Fine Bubble Membrane Diffuser |
Air System is a process, in which selection of size and quality of Diffusers Play a vital role. In case the selection is made for the undersize dimensions and qualities, the specific no. of bacterias, required for aeration may not get activated and the system shall not work. On the other hand, an oversize dimensions and qualities shall activate the unwanted bacterias and the system shall prove to be a failure. Hence, we require the details from clients, in order to select the Appropriate size and quality of Diffusers. |
|
|
|
| |
| Fab Media/water treatment |
Floating Media can be utilized in new or old bio reactors and enhance performance. One the media is placed inside a bio reactor and set in proper operation, you have a complete stabile , clog-free bio-film reactor.
Microorganisms, which are attached to the floating media reduce the organic load. This is a fixed-film process where the floating media become carriers that build a floating bed in the water and stabilize WWTP.
|
|
|
|
Use in exsiting tank, upgrade exsiting plants, and convert to efficient BOD5,NH3-N and TSS removal without tank expansion.
We have our offices available in all metropolitan cities in India equipped with sales cum service engineers and therefore, we ensure our availability within 24 hours on customer's demands.
Regarding Diffusers, these are completely imported and we have recently installed imported automatic plant for the manufacturing of Fixed Film Media of various thicknesses ranging from 0.3 mm to 0.7mm. The detailed technical specification is also enclosed herewith for your ready reference.
The list of our customers is very exhaustive and we have supplied our products for water and wastewater treatment to many OEMs / users in last 4 years. Most of our customers have been giving us repeat orders, which speaks for the quality of the products and services, we provide.
Needless to mention that the products we manufacture meets the highest international standards and are tested as per relevant ASTM Standards to meet the requirements and customer satisfaction.
Hope this information will definitely enhance your interest about our products.
For further information please feel free to contact to the undersigned.
We now request you to kindly enlist our name as approved supplier and favour us with your valued enquiry for supply of aforesaid products. |
|
Jitendra Arya
Application Engineer,
205-206, Lusa Tower , Azadpur Commercial Complex,
Azadpur, Delhi-110033 (India),
Ph : +91-11-27671851,27679052,27673035
,
Fax: +91-11-27674703,
e-mail : kayintl@vsnl.com, kayintl@eth.net |
| |
