BK PA6 Natural (ivory) / black (PA6)
Unmodified cast nylon 6 grade exhibiting characteristics which come very close to those of BOBKAY 66 SA. It combines high strength, stiffness and hardness with good creep and wear resistance, heat ageing properties and machineability,
 
BK PA6
Subcategory: Nylon; Polymer; Thermoplastic
Key Words: Polyamide
BK PA6
Physical Properties Metric Comments
Specific Gravity 1.14 g/cc ASTM D792
Water Absorption 0.3 % Immersion, 24hr; ASTM
D570(2)
Water Absorption at Saturation 6 % Immersion; ASTM
D570(2)
Hardness, Rockwell M 85 ASTM D785
Hardness, Rockwell R 120 ASTM D785
Tensile Strength, Ultimate 68.3 MPa ASTM D638
Elongation at Break 50 % ASTM D638
Tensile Modulus 3.21 GPa ASTM D638
Flexural Modulus 3.62 GPa ASTM D790
Flexural Yield Strength 103 MPa ASTM D790
Compressive Strength 93.1 MPa 10% Def.; ASTM D695
Compressive Modulus 2.28 GPa ASTM D695
Shear Strength 64.1 MPa ASTM D732
Coefficient of Friction 0.14 Dry vs. Steel; QTM55007
K (wear) Factor 181 x 10-8 mm³/N-M QTM 55010
Limiting Pressure Velocity 0.21 MPa-m/sec 4:1 safety factor; QTM
55007
Izod Impact, Notched 0.534 J/cm ASTM D256 Type A
CTE, linear 68°F 101 Fm/m-°C (-40°F to 300°F); ASTM
E831
Melting Point 216 °C Crystalline, Peak; ASTM
D3418
Maximum Service Temperature, Air 104 °C Long Term
Deflection Temperature at 1.8 MPa (264 psi) 93.3 °C ASTM D648
Flammability, UL94 (Estimated Rating) HB 1/8 inch
 
 
Our Products
   
Field of Application
   
Gallery
Ahmedabad
+ 91-079 -26400872/73/74
kayintlahd@gmail.com
Bengaluru
+91- 80 - 4157 1217
kay.bangalore@gmail.com
Chennai
+91 - 44 - 2855 4337 / 4281
kayintl@md4.vsnl.net.in
Delhi
+91-11-2767 1851 / 9052
kayintl@vsnl.com
 
Durg
+91 - 788 - 4016120
skedurg@gmail.com
Jamshedpur
+91 657 2425903
kayintl2003@yahoo.com
Kolkota
+91-33 - 2237 1948
ray_tpi@vsnl.net
Mumbai
+91-22-2284 1791
kayintl@bom2.vsnl.net.in